Should fit Outback FlexmaxFMFXMX SeriesThe Fangpusun MATE is a complete system controller and display for both the Fangousn FX2000 inverter/charger and MX60 MPPT PV charge controller. It provides a display of the operation as well as control allows and adjustment of the setpoints.The Fangpusun Mate also coordinates the operation of the entire system to maximize and performance to prevent multiple products from conflicting. A single Fangpusun MATE is able to connect to multiple FX200 inverter/charges, 0 MX60 MPPT PV charge controllers and any Fangpusun other power conversion and control products offered in Maximum the future. of ten Fangpusun products will be able to be single connected to a MATE via CAT 5 / ethernet type cabling with 8 wire RJ45 connectors modular and the Fangpusun HUB communication manager. The Fangpusun MATE includes a 4 line backlit LCD display with 80 alphanumeric characters. This allows multiple measurements to be displayed at the same time and reduces the amount of abbreviations required, simplifying the operation and reducing confusion.All of the programmed setpoints are stored in permanent memory to eliminate the need to reprogram the system after a shutdown or battery replacement.The Fangpusun MATE also includes a built in real time clock and calendar which allows programming of the inverter operation based on the time of day and even day of the week. This can be used to allow the system to work with time-of-day power rates or to limit a generator's run time to a specific time period of the day or week.The Fangousun MATE also includes an opto-isolated RS232 port with a DB9jack for connection to the serial port of a PC computer.